Shure Americas | BETA 58A Vocal Microphone | Precision, Sensitivity, Vocal, Instrument

Beta Microphones

Application-specific microphones engineered for reproduction of fine details in demanding environments.

Play Video

Downloads: User Guide; Beta 58A Spec Sheet; Brochure

Add To Favorites

Remove From Favorites

SuperCardioid Polar Pattern: Screens unwanted sound sources. Ideal for individual instruments in a multi-microphone setting, or single sources in noisy environments.
Tailored Frequency Response: Smooth, extended response. Tuned to accentuate specific types of instruments, or voices.

BETA 58AVocal Microphone

Shure

Dynamic: Simple, rugged diaphragm/coil. handles extreme volume levels without distortion.

Recommended Uses: Live Vocals; Podcast/Voiceover

The Shure Beta 58A® is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.

The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.

Go Wireless View wireless systems that include a wireless version of this microphone

Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
Neodymium magnet for high signal–to–noise output

Hardened steel mesh grille that resists wear and abuse
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Minimally effected by varying load impedance
Legendary Shure quality and reliability

Type: Dynamic (moving coil)
Frequency Response: 50 to 16,000 Hz; View Larger; NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.
Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV); *1 Pa = 94 dB SPL

Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing.; Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
Case: Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille.
Adjustable, Stand Adapter: Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish.
Dimensions: See User Guide.
Net Weight: 278 grams (9.92 oz)

	Name	Availability
	A55M Shock Mount Microphone Clip Isolation mount and swivel adapter securely attaches Shure models SM57, SM58, SM86, Beta57A, Beta58A, Beta87A, and Beta87C to standard microphone stands.	Where To Buy
	A25D Microphone Clip Securely mounts the SM58, SM57, SM87A, Beta 87A, Beta 87C and all other microphones with 3/4-inch and larger handles to a standard microphone stand.	Where To Buy
	A58WS Gray Microphone Windscreen Reduces unwanted breath and wind noise. For use with all larger Shure "ball-type" microphones including the SM58, Beta58A, SM48, and the 565SD. Available in 6 colours; black, blue, gray, green, red, and yellow.	Where To Buy
	R176 Cartridge for Beta 58A Direct replacement cartridge for Shure Model Beta 58A supercardioid dynamic microphones.	Where To Buy
	RK265G Factory Original Beta 58A Microphone Replacment Grille Factory original dent-resistant replacement grille for Shure Beta58A wired microphones and wireless transmitters.	Where To Buy
	A55HM Snap-in "Shock Stopper" Mount Shock Stopper Isolation Mount/Swivel Adapter, Half Mount, for SM57, SM58, Beta 57A, Beta 58A, Beta 87A, Beta 87C or any Shure tapered handle mic.	Where To Buy